zmorph3d.com
35
13. Laser cutting and engraving
Before first work with Laser Toolhead refer to the safety instruction available in Manual or Zmorph Knowledge
Base:
bit.ly/ZmorphFab_Manual
bit.ly/Laser_PRO_Safety
13.2 Calibration and first work
13.1 Safety
After uploading the file to an internal card or inserting an external SD card with the pre-pared file:
Enter the ‘NEW JOB’ menu.
Go to the ‘CHOOSE FILE’
section.
Files uploaded to the internal
SD card are located in the
‘INTERNAL’ tab, files uploaded
to the SD card are located in
the ‘EXTERNAL’ tab.
NOTE
If the user inserted the external SD card the screen should jump forward to the ‘CHOOSE FILE’ section
screen on the ‘EXTERNAL’ directory.
If there was no previously chosen file, after pressing on the ‘New job’ menu the screen will go directly to
the ‘CHOOSE FILE’ section.
NEW JOB
MAINTENANCE
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START
BACK
CANCEL
NEXT
EXTERNAL
INTERNAL
example.gcode
Laser cutting and engraving
