Zmorph Fab - QUICK START GUIDE
22
NOTE
Before performing the automatic calibration make sure the worktable is clean and prepared.
See the toolhead changing process before mounting the Dual Extruder Toolhead on the machine.
During the automatic calibration process the printer is heating up.
9.2 Autocalibration
Dual Extruder Toolhead
Choose ‘MAINTENANCE’.
Choose ‘CALIBRATE’.
Choose ‘AUTO 3-POINT’. Wait
for the machine to heat up
and finish the probing.
To ensure best calibration
result print calibration
pattern. Choose ‘START’.
LOAD
FILAMENT
CHANGE
TOOL
CALIBRATE
3D PRINTING
BACK
MORE
CALIBRATION
AUTO
3-POINT
BACK
MORE
MANUAL
CALIBRATION
NEW JOB
MAINTENANCE
In the last calibration step the machine
will print five lines as a final touch
SKIP
START
CALIBRATION
In the last calibration step the machine
will print five lines as a final touch
SKIP
START
CALIBRATION
By pressing the
‘SKIP’ button the
user is approving the
automatic calibration
without visual
validation. After that
the calibration process
ends.
NOTE
