zmorph3d.com
15
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
Take off the front cover.
Straighten the tip of
filament up or cut its end.
Wait till extruder reaches
the proper temperature.
The yellow HEATING sign
will change colour from
yellow to green.
LOAD/UNLOAD
PLA
ABS
PARK
TOOL
PLA
ABS
PET
CUSTOM
TEMPERATURE
COOL
DOWN
TEMPERATURES
BACK
LEFT
RIGHT
ALL
LOAD/UNLOAD
TEMPERATURES
PARK
TOOL
BACK
Insert filament into the
guide hole on top of the
extruder.
Push the filament down
until you feel it has been
grabbed by extruder drive
gear.
Wait until the material
flows out of the nozzle.
Tap the feed button again if
necessary.
Tap the LOAD/UNLOAD menu.
Tap the bottom arrow on the
screen to feed 80 mm of the
filament. Choose down arrow
with LEFT description to do
that.
By tapping the button
showing ‘80 mm’ you
can change the amount
of extruded filament to
15 or 5 mm.
NOTE
Single Extruder Toolhead 1.75mm
80mm
80mm
80mm
