Zmorph Fab - QUICK START GUIDE
24
NOTE
Each one of those lines is printed on a slightly different height (+/-0.05 mm) with the middle line
being the result of the automatic calibration process.
If none of the printed lines is proper, please follow these steps:
Choose ‘NONE’ option.
Tap the ‘NEXT’ button.
Printer will ask which of the
line is closest to the best
result 1 or 5. Pick one and
tap ‘NEXT’.
Printer will prepare another 5
lines lower or upper according
to your choice. Each line is
printed 0.05 mm lower/upper
according to user choice.
Pick the best line and nd tap
‘NEXT’.
Calibration complete.
Choose the best printed line
(numeration from left to right)
1
2
3
4
5
NEXT
NONE, REPEAT PRINTING
Choose the best printed line
(numeration from left to right)
1
2
3
4
5
NEXT
NONE, REPEAT PRINTING
Which line was better?
1
5
NEXT
BACK
NONE, REPEAT PRINTING
1
2
3
4
5
NEXT
Choose the best printed line
(numeration from left to right)
Calibration complete!
DONE
Dual Extruder Toolhead
NOTE
If after the second round of calibration the user still decides
that none of the lines are accurate, the machine will show a
warning screen and advise to repeat the automatic calibration
process or to perform the manual calibration.
If meeting calibration issues or autocalibration doesn’t work,
please contact Technical Support.
Calibration
result inaccurate
REPEAT
MANUAL
BACK
