Zmorph Fab - QUICK START GUIDE
32
12. CNC milling
Before first work with CNC refer to the safety instruction available in Manual or Zmorph Knowledge Base:
bit.ly/ZmorphFab_Manual
bit.ly/CNC_PRO_Safety
12.2 Calibration and first work
12.1 Safety
Enter the ‘NEW JOB’ menu.
Go to the ‘CHOOSE FILE’ sec-
tion.
Files uploaded to the internal
SD card are located in the
‘INTERNAL’ tab, files uploaded
to the SD card are located in
the ‘EXTERNAL’ tab.
After uploading the file to an internal card or inserting an external SD card with the prepared file:
NOTE
If the user inserted the external SD card the screen should jump forward to the ‘CHOOSE FILE’ section
screen on the ‘EXTERNAL’ directory.
If there was no previously chosen file, after pressing on the ‘NEW JOB’ menu the screen will go directly to
the ‘CHOOSE FILE’ section.
NEW JOB
MAINTENANCE
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START
BACK
CANCEL
NEXT
EXTERNAL
INTERNAL
example.gcode
CNC milling
