Zmorph Fab - QUICK START GUIDE
30
Place the toolhead in
convenient position for
removing worktable.
Slide the table backwards.
Disconnect the table plug.
Pull the worktable forward.
Pull the lever placed on the
left to unlock the heated table.
Lift the table with a little bit
of strength up to disconnect
it from the carriage magnets.
11. Changing worktable
Changing worktable
The user can move the toolhead manually by disabling the motors by:
• pressing the reset button,
• powering down the machine,
• parking the toolhead in the ‘CHANGE TOOLHEAD’ section,
• waiting 1 minute for the standby mode.
NOTE
