Zmorph Fab - QUICK START GUIDE
36
Laser cutting and engraving
Select the prepared G-code
file.
If the prepared file or folder
is not visible on the list press
the up/ down arrow buttons to
navigate through the file list.
Exiting the folder is done by
selecting the folder icon.
CANCEL
NEXT
EXTERNAL
INTERNAL
CANCEL
NEXT
EXTERNAL
INTERNAL
CANCEL
NEXT
EXTERNAL
INTERNAL
example.gcode
example.gcode
example.gcode
After selecting the file, press
‘NEXT’.
Go to the ‘Calibrate’ section.
Press ‘Set’.
NOTE
The movement in the X and Y axes will be disabled until they are homed. It is a safety procedure, to
protect the machine against damage.
The movement in the Z axis is avaliable all the time. Use it to move the laser tube above the surface
height of the prepared material.
The information on the Z axis height is stored in the motherboard internal memory. That is guided
by the fact that this value is not easy to change manually by the user unlike the X and Y axes.
CANCEL
NEXT
EXTERNAL
INTERNAL
example.gcode
X
Y
Z
MOVE Z
MOVE X Y
BACK
SET
CALIBRATE
SETTINGS
CHOOSE
FILE
START
BACK
NOTE
Before starting the Laser engraving/cutting process the
machine must be calibrated to the mounted material on the
worktable. Skipping the calibration process may result in
damaging the machine or the toolhead.
10mm
1mm
70.00
30.00
12.00
