Zmorph Fab - QUICK START GUIDE
16
8.2 Autocalibration
Before performing the automatic calibration make sure the worktable is clean and prepared.
During the automatic calibration process the printer is heating up.
Choose ‘MAINTENANCE’.
Choose ‘CALIBRATE’.
Choose ‘AUTO 3-POINT’. Wait
for the machine to heat up
and finish the probing.
To ensure best calibration
result print calibration
pattern. Choose ‘START’.
LOAD
FILAMENT
CHANGE
TOOL
CALIBRATE
3D PRINTING
BACK
MORE
CALIBRATION
AUTO
3-POINT
BACK
MORE
MANUAL
CALIBRATION
NEW JOB
MAINTENANCE
In the last calibration step the machine
will print five lines as a final touch
SKIP
START
CALIBRATION
NOTE
Set the printing temperature
to the PLA material., Nozzle
210 ˚C, bed 60 ˚C.
To do that tap the gaps and
type the temperature on the
keyboard.
Wait for extruder to heat
up. When done tap ‘NEXT’.
NEXT
BACK
CURRENT
TARGET
NOZZLE
BED
NEXT
BACK
TARGET
NOZZLE
BED
CURRENT
Single Extruder Toolhead 1.75mm
In the last calibration step the machine
will print five lines as a final touch
SKIP
START
CALIBRATION
By pressing the
‘SKIP’ button the
user is approving the
automatic calibration
without visual
validation. After that
the calibration process
ends.
NOTE
210
210
60
60
210
210
60
60
