X-Ray Inspection System
User Manual
P a g e
| 55
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Figure 4-35 Keyboard
Reverse Motor Direction key:
The default setting of the equipment is for the conveyor
to run in the forward direction (the starting position is at the entrance and the
movement towards "exit" is the forward direction). The direction of the conveyor can be
reversed if required.
4.12.3
Counter Setting
If the operators need to know and record the quantity of the inspected luggage, they can
check the "Counting of inspected articles" on the system status panel or in the "Counter
setting" interface.
Total package counter:
It means the total number of the inspected articles since the
equipment has been put into use. This value cannot be reset.
Temporary package counter:
It means the number of the inspected articles after this
user logs into the system this time.
Notes:
The selection will immediately effect in the parcel counting in the main interface
.
