X-Ray Inspection System
User Manual
P a g e
| 28
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
(ii) Power indicator light (green): When the security equipment is
powered on, the green light will glow; when the security
equipment is powered off, it will fade out.
Emergency stop button:
In case of emergencies, press this button
immediately. The X-Ray generator and the conveyor of the
equipment will stop working immediately. Since the emergency
stop button is connected with interlocking devices, the X-Ray
generator and the conveyor of the equipment will be powered on
and put into normal use only after restoring all the interlocking
devices and clicking the Start button. Turn the button clock-wise to
release the button and press the Start button again to restore the
equipment to normal status.
Key Controls (control operation, image processing, menu/functional shortcuts)
(i) Keys to control the conveyor: Click "Forward" or "Backward" to
make the conveyor to operate in the direction set by the system.
Click "Stop", and the conveyor will stop running.
(ii) Window navigation key: When the image in the scanning area is
zoomed in or out, the bottom right corner will display a preview
window automatically. Click any direction key to move the
window. They can also be used as the navigation keys "up, down,
enter, exit" in the system menu.
(iii) Functional shortcuts: Please refer to "4.12.2 Keyboard" to set
the shortcuts.
(iv) Menu: Click "Menu" to open the system menu.
(v) Marking key: Please refer to "4.10 TIP images"
.
