X-Ray Inspection System
User Manual
P a g e
| 60
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
2)
The surface of sideboard and top board of the equipment.
3)
The guard boards on both sides of the conveyor and the cover board under the
conveyor, etc.
4)
The surface and edges of the belt.
5)
Ventilation port.
6)
The surface and other places of the control console.
5.2.2
Interior of the Equipment
The interior of the equipment is of utmost importance since it includes the Industrial
Personal Computer (IPC), electrical control panel, air switch, detection box and other
important parts. When cleaning the interior on a daily basis, it’s suggested to remove the
stubborn dust by brush or vacuum. It is recommended to clean the following parts on a
regular-basis to ensure smooth functioning of the equipment.
1)
IPC part.
2)
Electrical control panel part (please take off the installation case and the cover) and
the electrical device terminal.
3)
Air switch part.
4)
For X-Ray generator and detection box, clean the dust on the surface, do not
unscrew the retaining screw.
5)
Cover of the cooling fan and dust-proof fan.
5.2.3
Display, Slot of Photoelectric Sensor and Control Console
1)
During the daily usage of the equipment, the surface of the display and fingerprint
reader will be covered by dust which will influence the operators when reading
images and identifying articles. The display screen (in off state) can be cleaned by a
wet towel with a detergent.
