X-Ray Inspection System
User Manual
P a g e
| 52
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Training
After initiating the training function, the administrator can train the operators on image
reading. The training function is used to train and assess the operators’ ability to identify
the dangerous and prohibited articles. The training doesn’t need to start up the
Conveyor belt and X-Ray generator, but to simulate the article scanning process and
display a series of scanned images saved by the administrator in Industrial Personal
Computer (IPC) disk on the screen. The "Training" interface has "Parameter Setting" on
the left and "Operation Panel" on the right.
4.11.1
Parameters Setting
Click "Training" on the main menu to open the training interface as shown below:
Figure 4-33 Training Set
Image intervals:
Set the display time interval between the consecutive images. Select
the "Image interval" and set the time interval, such as "1", "2" or other time intervals as
required by the administrator. The setting range is between 1-120 seconds.
Training mode:
Click the drop-down list to view the available training modes. The
options are: "Single time", "Sequential circulation", "Random circulation" and other
modes. The operator can select the "Training mode" based on specific needs.
4.11.2
Operation Panel
Click the "Select folder" button to manually select an image gallery used in training on
storage devices.
