X-Ray Inspection System
User Manual
P a g e
| 16
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Working Principle
The X-Ray Inspection System has five modules: Item Transmission module, X-Ray
Generator & Control, Signal acquisition & Transmission module, Industrial motherboard
and Electric Control module.
The items enter the X-Ray inspection tunnel through the conveyor belt. A photo-electric
sensor is installed at the entry of the tunnel. When the items enter into the tunnel, the
sensor sends an inspection signal and the Control board commands the X-Ray Generator
to generate X-Ray. The X-Ray penetrate through the items and it is partially absorbed by
the items in the tunnel and the rest is absorbed by the X-Ray receiver. Then the receiver
converts the X-Ray signal into digital signal and then sends to the computer. With the
excellent image processing algorithm incorporated, a clear image of the items will be
displayed on the screen.
Figure2-1 System Operation Process
Figure2-2 Equipment Internal X-Ray
Diagram
