SW3-L3
GIGABIT/FAST ETHERNET SWITCH/ROUTER TYPE SW3-L3
154/180
USER GUIDE - M0SW3M1902Iv07 - V06 February 2019
restore
This applies the factory configuration.
Syntax
:
swt />
restore
Arguments
:
-
Observations
:
This command can be used irrespective of the directory
where the user is.
Example
:
swt />
restore
save
This saves the changes made in configuring the equipment in its permanent
memory. However, these changes will not take effect until the equipment is
rebooted.
Syntax
:
swt />
save
Arguments
:
-
Observations
:
This command can be used irrespective of the directory
where the user is.
Example
:
swt />
save
set
This changes the value stored in the configuration parameters or in the
attributes of an item in a matrix-type parameter.
Syntax
:
swt />
set
[name][[nº][/name2]]
Arguments
:
-
name
name of the parameter to be changed.
nº
item number of a matrix-type parameter.
name2
name of an attribute in a matrix-type parameter.
Observations
:
When this command is executed the system waits for the
new value to be entered.
The parameter to be changed must be in the current
directory or its relative route must be entered.
