SW3-L3
GIGABIT/FAST ETHERNET SWITCH/ROUTER TYPE SW3-L3
90/180
USER GUIDE - M0SW3M1902Iv07 - V06 February 2019
•
Max Prefix Action.
It admits two values:
warning-only
and
restart
. Sets the
action to be adopted when the limit set in
Max. Prefix
is exceeded.
•
Warning Th.
Percentage regarding the maximum number of prefixes configured
which, if exceeded, involves the sending of a warning. If the value is 0, the
threshold option is not active. It makes sense to activate when the configured
action is
restart
.
•
Restart.
If the action is
restart
, it sets the time since the limit is exceeded until the
restart occurs. The units are minutes.
Routes:
In this section the networks that are advertised by the router, and the conditions with which
these advertisements will be made are set:
•
Network.
Address of IP network. Admits the A.B.C.D/M format where M is the size
of the mask, or the A.B.C.D/N.O.P.Q format.
•
Aggregation Type.
Controls how the network information of the previous
parameter is advertised. It admits five values:
no-aggregate
,
aggregate
,
as-set
,
summary-only
and
as-set_sumary-only
. For all modes involving aggregation,
only the route configured in update messages will be included when there is at
least a real route that is included in the aggregated network. The behaviour of each
of the options is as follows:
o
no-aggregate
: The network is advertised as it has configured.
o
aggregate
: Indicates that the network is advertised as aggregated type.
o
as-set
: Indicates that the network is advertised as aggregated type and
that the AS group is created.
o
summary-only
: Indicates that the network is advertised as aggregated
type and that the routes included in the aggregated network will be filtered
so that will not be advertised.
o
as-set_sumary-only
: Indicates that the network is advertised as
aggregated type and that the routes included in the aggregated network
will be filtered so that will not be advertised, and that the AS group is
created.
