SW3-L3
GIGABIT/FAST ETHERNET SWITCH/ROUTER TYPE SW3-L3
121/180
USER GUIDE - M0SW3M1902Iv07 - V06 February 2019
5.18.1
802.1x
This submenu permits specifying the 802.1x user authentication through access to a
RADIUS server.
FIGURE 61
802.1x
submenu configuration page
The general configuration parameters are the following:
•
Enable.
A simple
CheckBox
parameter to set if the RADIUS client, as well as the
802.1x authentication, is active or not.
•
Periodic reauthentication (reAuthEnable).
If the RADIUS server limits the
session time, this option indicates to the equipment that periodic reauthentication
has to be requested.
•
Reauthentication period (reAuthPeriod).
It sets the time between one
reauthentication and the next. The parameter is expressed in seconds, and the
accepted value range is between 1 and 86400 (1 day), where the default value is
3600 (1 hour).
•
Reauthentication attempts (reAuthMax).
It sets the maximum number of tries the
equipment will send to request reauthentication. Valid values are 1 to 10.
•
Quiet time after failure (quietPeriod).
It sets the period of time in which the
equipment will not request new tries once the maximum number of configured tries
is exceeded. Valid values, in seconds, are 1 to 65535.
•
IP address.
It sets the RADIUS server IP address.
