SW3-L3
GIGABIT/FAST ETHERNET SWITCH/ROUTER TYPE SW3-L3
59/180
USER GUIDE - M0SW3M1902Iv07 - V06 February 2019
•
VID ACL (Access control list).
Access VLANs allowed for each port. This
parameter behaves like a filter with regard to packets accepted on the Port level,
and only packets with a VLAN identifier included in the list will be processed for
transmission and reception purposes. All the packets have a VLAN identifier, either
because it was included when they were received (tagged frames) or because it
was assigned by the input port at the time of reception, with the
VID
parameter
being assigned to the port in the latter case. The special value
any
signifies that
the filter is not active. The default value is auto, and it implies that only those
packets belonging to the VLAN assigned to the port will be accepted, that is, the
filter is not active.
A group of discreet vlans is configured with the identifier of each one, separated by
a comma, without spaces. If a range is to be included, the initial and final vlan
identifiers are separated by a dash. Example: in equipment with the
vlan1
to
vlan3
and
vlan5
defined, the group of numerical identifiers will be
1-3,5
.
For the interfaces operating in QinQ Core mode, the VLAN identifiers that are
included in this parameter determine which QinQ Access interfaces are to be
served through each interface, those whose VID parameter is part of the ACL.
•
Description.
A mnemonic descriptive field available to users.
•
LAG.
Link group identifier. It sets whether the interface is part of a group of
interfaces operating as aggregate interface or not. The value of the parameter, if it
is other than
none
, indicates in which of the 8 possible groups the interface will be
integrated.
A group of LAG interfaces is to be considered as a single interface, so that the
links of the same group are not to be considered a loop by the STP, allowing a
bandwidth increase between equipment while keeping some level of automatic
redundancy. All the interfaces within a group must be interconnected to the same
end devices.