SW3-L3
GIGABIT/FAST ETHERNET SWITCH/ROUTER TYPE SW3-L3
103/180
USER GUIDE - M0SW3M1902Iv07 - V06 February 2019
•
Max Age.
The maximum time during which the device considers the last BPDU
message received as valid. In the case of the stipulated time expiring, the device
assumes there has been a topological change and initiates the topological change
communication process. The default value is 20 seconds, and valid values are 6 to
40 seconds.
•
Hello Time.
This parameter sets the time between sending BPDU messages (the
STP protocol messages). The default and maximum value is 2 seconds.
•
Forward Delay.
This parameter is the maximum period of time for an interface to
be in the listening and learning states. The default value for this period is 15
seconds, and valid values are 4 to 30 seconds.
•
Tx Hold Count.
This sets the maximum number of BPDU packets that can be
transmitted in one second. The default value is 6 and valid values are 1 to 10.
FIGURE 50
STP
menu configuration page
