Ziton ZP1-F2, Installation Manual

Page: 108 / 113

Appendix B: Regulatory information
102 ZP1-F Series Installation Manual
European standards
European standards for fire control and indicating equipment
These control panels have been designed in accordance with European EN 54-2,
EN 54-4, BS 5839-1, NBN S 21-100, and NEN 2535 standards.
In addition, all models comply with the following EN 54-2 optional requirements.
Table 68: European standards
Option
Description
7.8 Output to fire alarm devices
Note: inputs and outputs on the optional 2010-1-SB expansion board do not
support the optional requirement of EN 54-2 clause 7.8 and should not to be used
for fire alarm devices.
7.9.1 Output to fire alarm routing equipment [1]
7.9.2 Alarm confirmation input from fire alarm routing equipment [1]
7.10 Output to fire protection equipment (type A) [2]
7.11 Delays to outputs
7.13 Alarm counter [3]
8.4 Total loss of the power supply
8.9 Output to fault warning routing equipment [2]
10 Test condition
[1] Excluding two-zone models.
[2] NEN 2535 operating mode only.
[3] Dutch models only.
European standards for electrical safety and electromagnetic compatibility
These control panels have been designed in accordance with the following
European standards for electrical safety and electromagnetic compatibility:
• EN 62368-1
• EN 50130-4
• EN 61000-6-3
• EN 61000-3-2
• EN 61000-3-3
EN 54-13 European compatibility assessment of system components
These control panels form part of a certified system as described by the EN 54-
13 Standard when installed and configured for EN 54-13 operation as described
by the manufacturer in the corresponding installation documentation.
Contact your installation or maintenance contractor to determine if your fire
system is compliant with this standard.