Ziton ZP1-F2, Installation Manual

Page: 60 / 113

Chapter 3: Configuration and commissioning
54 ZP1-F Series Installation Manual
Changing user level passwords
Use the corresponding menu option (shown below) to change the default user
level passwords.
Operator user level password
Basic installer user level password
Advanced installer user level password
To change the first two digits of a user level password:
1. Set the display for the desired user level password, and then press Enter.
2. Set the display as shown below, and then press Enter.
3. Select a value using the value selection buttons (2 and 4).
4. Press Enter.
5. Save your changes.
To change the last two digits of a user level password:
1. Set the display for the desired user level password, and then press Enter.
2. Set the display as shown below, and then press Enter.
3. Select a value using the value selection buttons (2 and 4).
4. Press Enter.
5. Save your changes.