Ziton ZP1-F2, Installation Manual

Page: 98 / 113

Appendix A: Configuration presets
92 ZP1-F Series Installation Manual
EN 54-2 Scandinavia
Table 50: Configuration presets
Preset Control
panel
EOL type Output
type
Sounder
outputs
Fire routing
outputs
Zone type
07 Two-zone Passive Class B 2 0 Mixed
07 Four-zone,
eight-zone
Passive Class B 3 1 Mixed
08 Two-zone Passive,
CleanMe
enabled [1]
Class B 2 0 Mixed
08 Four-zone,
eight-zone
Passive,
CleanMe
enabled [1]
Class B 3 1 Mixed
07 Two-zone EN 54-13
supervision
Class A 1 0 Odd: Automatic
Even: Manual
07 Four-zone,
eight-zone
EN 54-13
supervision
Class A 1 1 Odd: Automatic
Even: Manual
[1] The CleanMe feature is not available for Ziton devices.
Table 51: Additional configuration characteristics
Default sounder delay 0
Default fire routing delay 1
Default extended fire routing delay 3
Default zone delay 0n
Start/Restart sounders Start sounders or restart stopped sounders at Operator
user level with or without a fire alarm event
Table 52: Inputs and outputs
Input/Output
Standard EN 54-13
INPUT1 (Two-zone control
panel)
Remote reset Remote reset
INPUT1 (Four- and eight-zone
control panels)
Fire routing delay / extended fire
routing delay
Fire routing delay / extended
fire routing delay
INPUT2 Delays off Delays off
OUT1 Sounder circuit
Sounder circuit
OUT2 Sounder circuit
OUT3 Sounder circuit
Fire routing
OUT4 Fire routing
Note: Two-zone control panels have only two outputs with EN 54-13 disabled (OUT1 and OUT2)
or a single output with EN 54-13 enabled (OUT1/2).