Chapter 3: Configuration and commissioning
ZP1-F Series Installation Manual
27
Table 15: Regional variants of interface buttons and LEDs
Item EN 54
NEN 2535
NBN S 21-100
6
Sounder Delay
Fire Protection Fault/Disable/Test Evacuation Sounder Delay
8
Reserved
Fault Warning Fault/Disabled
Reserved
15
Sounder Start/Stop
Sounder Start/Stop
Evacuation Start/Stop
20
Fire Routing Delay
Fire Routing Delay
Warning Sounder Delay
21
Fire Routing ON/ACK Fire Routing ON/ACK
Warning Sounders Start/Stop
User levels
For your safety, access to some features of this product are restricted by user
levels. The access privileges of each user level are described below.
The configuration tasks described in this chapter can only be performed by an
installer user level, either basic or advanced. These user levels are reserved for
the installation contractors authorized and responsible for the system installation
and configuration.
Public user
The public user level is the default user level.
This level allows basic operating tasks, such as responding to fire alarms,
extinguishing events, or fault warnings at the control panel. No password is
required.
Operator user
The operator user level allows additional operating tasks that command the
system or perform maintenance functions. It is reserved for authorized users who
have been trained to operate the control panel.
Consult the operation manual for more details on the functions available for
public user and operator user levels.
Basic installer user
This user level is intended to quickly configure basic installation options that
cover most applications.
Advanced installer user
This user level is intended for installers that require configuring very specific
applications where all the advanced features provided by the control panel are
required. This level is also required for installers that require minor
customizations after configuring a basic installation.
Passwords and indications for each user level are described in “User level
passwords and indications” on page 28.
Summary of Contents for ZP1-F2
