31
3. BIOS Setup
The product is compatible with POS Ready, Windows 95/98/2000/XP/7 and Ubuntu Linux.
If the drivers are required, find the necessary files in the support CD. The storage media can
be HDD, Compact Flash (CF), or Disk on Module (DOM) depending on different options.
a.
Plug the AC power cord of the power adapter (CD-ROM DRIVE) to the power source.
Connect an external CD-ROM DRIVE to the POS system (as the figure below illustrated).
Insert the installation CD for the Operating System.
b.
Power on or reboot the system board, when screen appears message as
“Press DEL to enter SETUP”. Press <DEL> key to run BIOS SETUP Utility.
Note.
To set CD-ROM as the first boot device, please access the BIOS Setup (press <DEL> when
switch on the terminal). Access the
“Advanced BIOS Features” and select the
“USB-CD-ROM” as the “First Boot Device.”
Return to the main menu and press <F10> and then press
“Y” to save and complete the
setting.
※
The BIOS configuration is for reference only, it may subject to change
without prior notice.
Summary of Contents for POP-950-D5
