30
2.7. Adjust the Customer Display (Optional)
The POP-950 has optional Customer Display that is pre-installed into the POS system.
To adjust the Angle of View:
Adjust the height of Customer Display
Adjust the Display to the proper View Angle
a. Pull the tube of the Customer Display to
the desired height.
b. Adjust the Display to the proper View
Angle.
The maximum tilt angle is 53 degree
(4 steps adjustable) and the
rotate angle is ±180 degree.
Note:
Do Not rotate the display over 180
degree.
Please rotate the display clockwise/ or
counter-clockwise.
2.8. Configuration of Customer Display
There is a configuration utility to setup your pre-installed customer display
(refer to the configuration instruction manual for further information).
Note: COM Port Setting
The recommended (default) COM port setting is COM 1.
Rotate
Tilt
Summary of Contents for POP-950-D5
