15
2.6. Install Your Receipt Printer (Optional)
The POP-950 has optional thermal receipt printer module that is pre-installed into the POS
system. To install the paper roll into the printer:
2.6.1. Install/Replace the Paper Roll
The Receipt Printer (upper left)
Note:
Place the paper and reserve proper length to
pass through the printer slot.
Warning:
Do not pull out the paper with force through
the slot.
If the paper does not feed easily check whether
you are using the paper slot and there are no
obstructions in the paper path.
a. Press the button to open the printer
cover.
b. Place the receipt paper roll into the slot.
Align the paper roll to the left of the slot.
c. Close the cover by pressing the cover.
Make sure the cover is closed properly.
d. Turn on the power switch of the printer
(in the rear of the POS system)
Printer Cover
Button
Summary of Contents for POP-950-D5
