47
3.7. PnP/PCI Configurations
[ Onboard ]
[ Disabled ]
[ Auto (ESCD) ]
Press Enter
[ Disabled ]
[ 128 ]
Item Help
↑↓
←
→
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Init Display First
Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
** PCI Express relative items **
Maximum Payload Size
Phoenix
– AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
x
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Menu Level
□
Init Display First
Select initial display by PCI or Onboard device.
□
Reset Configuration Data
Select Enabled to reset Extended System Configuration Data (ESCD) when you exit
BIOS setup utility, if you have installed new add-on card and the system reconfiguration
has caused such a serious conflict that the OS cannot boot.
□
Resources Controlled By
BIOS can automatically configure the entire boot and Plug and Play compatible devices.
If you choose Auto, you cannot select IRQ DMA and memory base address fields, since
BIOS automatically assigns them.
□
PCI/VGA Palette Snoop
Select PCI/VGA Palette Snoop Enabled/Disabled.
□
Maximum Payload Size
Set maximum TLP payload size (byte) for the PCI Express devices.
Summary of Contents for POP-950-D5
