12
2.3. Replace the Hard Disk
a. Loosen the securing screw to remove
the HDD cover
Note:
To prevent injuries to the LCD Panel,
Carefully lay the front of the unit face down
on a flat, clean and stable surface with
additional cushioned material
(for example: blanket).
b. Pull the HDD Module to the left to
detach it from the POS unit.
Disconnect the HDD Cable to remove
the HDD Module.
Remove the HDD Module
c. Loosen the securing screws to
remove the hard disk from the
bracket.
Then replace a new hard disk (with
protective film attached to the HDD)
d. Re-install the HDD module and
replace the HDD cover to the POS.
HDD Cover
HDD Slot
With
HDD Module
HDD Bracket
Protective Film
Summary of Contents for POP-950-D5
