13
2.4. Plug AC Power Cord to the POS System
a. The power adapter should be found
on the bottom of the base.
Carefully lift up the POS and there is
a power connector in the bottom (as
image below illustrated).
Note:
To prevent injuries to the LCD Panel,
Carefully lay the front of the unit face down
on a flat, clean and stable surface with
additional cushioned material (for
example: blanket).
b. Plug the AC power cord into the
power connector.
c. Plug the AC power cord in to the
AC outlet.
Summary of Contents for POP-950-D5
