Ziehm Imaging, Inc. QUANTUM, User Manual, Page: 154 / 220

Section 10.0
MAN 06–0017H
ZIEHM QUANTUM
User’s Manual Page 154 of 220
6. USB memory devices stops working after being used many times (Check device in another PC
to make sure the device is still operational before trying to use it again in the
ZIEHM
QUANTUM )
7. USB memory stops working after being inserted several times ( Windows OS may have lost
driver information and therefore user operator must restart the system so the Windows OS can
load the driver again)
NOTE:
The USB is generally very fast taking only a few minutes to transfer images however,
the DVD can take as much as 30 min to greater than 1 hour to transfer several Giga
Bytes (GB) of data.
The DVD also needs to write a Table Of Contents (TOC) at the end of the image transfer
process. This unfortunately takes nearly the same time if you have just a few images
stored or many hundreds of images.
In both cases the system must obtain the image from the hard drive and then convert the
images from the RAW format into the particular image format selected and then add all
text and graphics to the image. This takes a few minutes depending on the number of
images selected.
WARNING:
If the user chooses to use non medical grade CD-R or DVD disks they do so at their own
risk.
The non medical grade DVD and CD disks have a potential to loose information or not
be recordable and may after a time not be readable.
“THESE NON MEDICAL GRADE DISKS ARE NOT RECOMMENDED FOR USE
BY
ZIEHM IMAGING, INC. ”.
NOTE:
The Embedded Windows operating system can in most cases determine the type and
model as well as find a driver to operate the USB memory device. However not all USB
memory device models and types can be accommodated Therefore, the
ZIEHM
QUANTUM cannot use all USB memory devices.
10.10.7 OPTIONAL: SEND DICOM IMAGES TO THE PAC’S SERVER
First the optional DICOM package must be active and the system has been programmed for the
correct AE and Server addresses in the service configuration screen.
The user follows the above instructions up to the point of selecting the USB or DVD buttons.
The user has merely to press the press the DIOCM SEND button to send and image to the facility
PACS Server.
The user can also choose to send an image to a DICOM printer by pressing the DICOM PRINT
button.
In all cases the image is also stored automatically to the image system when user/operator presses