Ziehm Imaging, Inc. QUANTUM, User Manual, Page: 134 / 220

Section 10.0
MAN 06–0017H
ZIEHM QUANTUM
User’s Manual Page 134 of 220
5) DELETE PATIENT allows the user/operator to select and delete a single patient file
from the database.
6) ADD TO LIST allows User/Operator to select patients for archiving.
7) ARCHIVE opens the archive screen to allow the User/Operator to export images to
external storage devices.
8) CONFIGURE allows the user operator to select start up functions for the system as well
as Authorization of operators for export operation logging.
The rest of this section will discuss and outline the above listed functions for the
PATIENT FILE screen.
Selection of a Patient from the file list:
When you need to select a different patient from the present active patient file the user should
open the file screen, then using the
PATIENT SCROLL arrow keys or the Right side File
selection SCROLL BAR to locate the patient file/record that you would like to make the active.
Once you have located the patient record simple touch the patient record line on the file screen or
use the
PATIENT SCROLL arrow buttons to move the patient record then stop. The system will
then if selected by touching the patient record line or stopping on the patient record will try to
recall images from this record and then display the patient name and images on the display
monitors.
To make this the active patient press the ENTER button on the right side of the text entry
keyboard. The system will then make this the active patient close the file screen and return ot the
Main Screen.
The patient is now active and all image stored will be placed in this patient record for exporting
or printing.
Closing the file without selecting a new patient:
The user can select different patients and their images by selecting them from the file list without
leaving the file screen. However, if the user does not want to make the newly highlighted file the
active patient and wishes to return to the original patient before entering the file screen they must
press the
EXIT button to leave the screen and return to the previously active patient.
The File screen sections can be adjusted be pressing the top edge of the file section on the touch
screen between header listings (name, ID, Accession, etc) to see more information for this
column.
To return the header section to the original size just press the same area again then move the
column back the original placement.
The lower SCROLL BAR will change to accommodate changes in the information screen area if
the columns get to large for a single screen. Pressing and moving the scroll bar will allow the
user/operator to view more information if needed.
Please see the individual sections below for more information on the functions of the buttons on
the file screen.