ZIEHL-ABEGG Econtrol EXDM, Operating Instruction

Page: 64 / 86

Function Controller status K1/ K2
1 = energized
0 = de-energized
Inverting
OFF ON
1K Operation without fault, line supply okay 1 0
2K Fault with indication by relay 0 1
3K Ext. Fault at digital input for external fault 1 0
4K Over or falling below limits for modulation 1 0
5K over or falling below limits for input signal “ E1 ” 1 0
6K over or falling below limits for input signal “ E2 ” 1 0
7K setpoint deviation to high 1 0
8K Switching on second group 1 0
9.10.6 Programming Add-on module type Z-Modul-B
Program the additional inputs and outputs likewise in “ IO Setup ” .
After connecting the module, the settings menus are automatically expanded to include the additional
inputs and outputs.
•
1 x analog input 0 - 10 V. For mode 1.01 without function, starting from 2.01 funktion
|
1E
|
or
|
2E
|
possible.
– Function
|
1E
|
for external target value function.
– Function
|
2E
|
for external manual operation.
•
1 x output 0 - 10 V (A2 / GND), Function programmable, e.g., for: Fixed voltage, proportional
level control, proportional input signal, group control, drive 2.
•
3x digital inputs (D3 / GND, D4 / GND, D5 / GND) function programmable, e.g.: Enable (ON /
OFF), external malfunction, output limitation, input 1/2, target value 1/2, internal/external preset,
controller / manual operation, control-function reversal ( “ heating ” / “ cooling ” ).
•
2 x relay outputs ( “ K3 ” and “ K4 ” ) Function programmable, e.g., for: Status signals, alarm
indications, external malfunctions at the digital input, level-control threshold, input signal thresh-
old, offset threshold (deviation between current and target value), group control.
Parameter Factory setting User Setting
=0RGXO%
42 44 41 32 34 31 A2 GND E3 GND D3 D4 D5 GND
OUT
0...10V
(I
max
=10mA)
+
IN
0...10V
(Ri>100k)
+
max. 5A/250VAC
Anal
og OUT
2
3
2
Analog IN
3
Di
gi
tal
IN
3
Di
git
a
l IN
4
Di
gi
tal
IN
5
K4 K3
16.05.2007
v_moea01k0.VSD
Programming of following functions of mode 2.03 is not
permissible on Z-Modul-B:
|
6A
|
,
|
7A
|
,
|
9K
|
,
|
10K
|
A2 Function 1A
A2 min. 0.0 V
A2 max. 10.0 V
A2 Inverting OFF
D3 Function OFF
D3 Inverting - - - -
D4 Function OFF
D4 Inverting - - - -
D5 Function OFF
D5 Inverting - - - -
E3 Function OFF
E3 Inverting - - - -
K3 Function OFF
K3 Inverting - - - -
K4 Function OFF
K4 Inverting - - - -
Operating Instruction Econtrol – model series EXDM Programming
L-BAL-E008-GB 0945 Index 005 Part.-No. 00156742-GB
63/85