Zeroplus LAP-C(16032), User Manual

Page: 90 / 130

Smart+
User’s Manual V1.04.04
90 FM07I4A
the main program.
The options below Stack Parameters are disabled if the oscilloscope is disconnected.
Channel DSO_CH1 and DSO_CH2 of LA connect with channel A0 and A1 of oscilloscope respectively. Below is the
captured waveform.
4.13 Noise Filter Setup
After Noise Filter is activated, users can select one channel in the left box, and click to add it into the
right box, then this channel can do noise filtering. Select the channel in the right box and click to delete it.
Ctrl and Shift key can be used to select two or more channels at the same time.
Double clicking the channel in the right box can pop out below dialog box, users can input sampling point or time as
the width of Noise Filter.