Zeroplus LAP-C(16032), User Manual

Page: 19 / 130

Smart+
User’s Manual V1.04.04
19 FM07I4A
Operating Environment:
WARNING

Avoid direct sunlight

Use in a dust free, non-conductive environment (see Note)

Relative Humidity: < 80%

Altitude: < 2000m

Temperature: 0 ~ 40 Degrees
As a Class A product, it may cause radio interference in a
domestic environment.
Pollution refers to ‘solid, liquid or gas (ionized gas) which
may cause reduction of dielectric strength or surface
impedance’.
Pollution Level 1: No pollution or only dry, non-conductive
pollution occurs. This pollution has no effect.
Pollution Level 2: Normally only non-conductive pollution
occurs. But temporary conductivity caused by the occasional
condensation must be kept in mind.
Pollution Level 3: Conductive pollution occurs or dry,
non-conductive pollution caused by the condensation occurs.
In such conditions, the equipment is normally protected
against exposure to direct sunlight, precipitation and wind, but
neither temperature nor humidity is controlled.
Note: EN 61010-1:2001 specifies the levels of pollution and
their requirements. Logic Analyzer belongs to Level 2.
Storage
Environment
Relative Humidity: < 80%
Temperature: 0 ~ 50 Degrees
Conclusion:
This section gives a basic description about the Logic Analyzer. Read the part of “Device Maintenance and Safety”
carefully before do any further operation.