Zeroplus LAP-C(16032), User Manual

Page: 110 / 130

Smart+
User’s Manual V1.04.04
110 FM07I4A
Count full periods: The incomplete waveform will be filtered.
All: Count the data of all memory pages.
4.22 Memory View
Memory View has two modes: Compact View and Complete View. Users can click the right key to switch the mode, it
is Compact Mode by default.
If there are many Buses, it can display them in separate pages and the page name is the Bus name(for example: Bus1
(eMMC)). Users can switch the pages. The up part and the Address part are locked. In below image, the part above the
thick line is the up part, which, with the Address part, are always visible when dragging the sliding bar.
Memory View is mainly used to take the packet format of Protocol Analyzer apart, and display the position and the data
in separate tables. By dragging the sliding bar, users can see the correspondent relation and status between position and
data in the Protocol Analyzer, and mark the data of each position by different colors, red means the data is write, blue
means the data is read. Current it only supports I2C, HDQ, 3-WIRE, I2C(EEPROM 24L), PMBus 1.1and SMBus2.0.