Zeroplus LAP-C(16032) User Manual Download Page 44

Page: 44 / 130

Smart+

User’s Manual V1.04.04

FM07I4A

File name

: Input the file name, the default is Wave.

Save as type

: Save the file as txt or csv, the default is txt.

Include environment info

: Export the file with detailed parameters(such as file information, related settings and

others) or not.

Arrange Output Data

: By Timestamp->Export the data with timeline order,

By Channel/Bus->Export the data with channel order.

Channels/Buses

: All channels and buses->Export data of Channel, Bus and Protocol Decoder.

All Buses->Export the data of Bus and Protocol Analyzer.

Buses with protocol decoders(including channels)->Export the data of Protocol Decoders (including

channels).

Buses with protocol decoders(excluding channels)->Export the data of Protocol Decoders (not including

channels).

Data Selection

Summary of Contents for LAP-C(16032)



































































































































Search results

Summary of Contents for LAP-C(16032)

Reviews:

Related manuals for LAP-C(16032)

Brands by name

Popular brands

Zeroplus LAP-C(16032), User Manual

Search results

Summary of Contents for LAP-C(16032)

Reviews:

Related manuals for LAP-C(16032)

Brands by name

Popular brands