Zeroplus LAP-C(16032), User Manual

Page: 65 / 130

Smart+
User’s Manual V1.04.04
65 FM07I4A
Packet : The Bus packet is Data. The Protocol Analyzer packet is different according to different Protocol Analyzer.
Condition
: Set the Find condition, which includes “==”, “!=”, “In Range”, “Not In Range”, “<”, “>”, “String” and
“None”. Only “= =” can be set as trigger condition. “None” could help to count the packets and find particular packet.
Min : Only when condition is “= =”, “!=”,”, “In Range”, “Not Range”, “<” or “>” , the Min value can be set.
Max
: Only when condition is “In Range” or “Not In Range”, the Max value can be set.
If the condition is “String”, the interface will change as below image shows, users can input continuous data as the find
condition .
Note: it is hardware trigger if the condition is “==”, the others are software trigger.
For some models, this function needs to be paid to use.
Select “Bus/Protocol Analyzer”, and select bus, packet and condition, then “Trigger Condition Setting” would be
enabled.