Zeroplus LAP-C(16032) User Manual Download Page 50

Page: 50 / 130

Smart+

User’s Manual V1.04.04

FM07I4A

Select Language

: Chinese(Si), Chinese(Tr) and English are preinstalled, the default is the language selected during

installation. In the future more languages will be provided in individual files. The software will auto-detect the new

installed language and allow it be used by users.

Post Capture Options

: For the question “When pressing Stop during sampling”, users can select “Show present

acquisition” or “Show newly acquired data”, the default is “Show present acquisition”.

Packet Names

: Display the packet name in Full name or Abbreviations. Full name is selected by default.

Gridlines

: Show gridlines in the waveform view area. It is not selected by default.

On-Screen Keyboard

: Open the screen keyboard to input value. Take Sampling Setup as an example, clicking the

value input box will pop out the keyboard, see below image.

4.5.2

Start-up

Summary of Contents for LAP-C(16032)



































































































































Search results

Summary of Contents for LAP-C(16032)

Reviews:

Related manuals for LAP-C(16032)

Brands by name

Popular brands

Zeroplus LAP-C(16032), User Manual

Search results

Summary of Contents for LAP-C(16032)

Reviews:

Related manuals for LAP-C(16032)

Brands by name

Popular brands