Zeroplus LAP-C(16032), User Manual

Page: 104 / 130

Smart+
User’s Manual V1.04.04
104 FM07I4A
Packet#: The packet order.
Name: The packet name.
TimeStamp: The packet start point.
Data: The data in the packet.
Length: The length between the start point and the end point.
Settings : Click this button to pop out Bus Packet Settings dialog box.
Bus Selection: Select the needed Buses. All Buses are selected by default.
Packet Information: Select the needed items and their colors. All items except Time difference are selected and in blue
color by default.
Text: The text color is white by default. “Contrasting text color” means the text color is the contract color of the basic
color.
Background: The background color of Packet List. It is white by default, users can define its color by themselves.
Unit: There are “us”, “ms” and “s” to choose. It is “ms” by default.
Separate lines automatically: If the data of one packet is too long to be displayed in one line, then it would be displayed
in two or more lines automatically. It is selected by default.
Classification: Classify the Buses(Protocol Decoders).
Refresh : Refresh the content.
Export : Export the packet list.
Synch Parameter Settings :
Activate Packet and Waveform Synch : It is not selected by default.
Top of Packet List : After packet and waveform synch is activated, the synch point of the packet list is the top packet.
Middle of Packet List : After packet and waveform synch is activated, the synch point of the packet list is the middle
packet.
Middle of Waveform view area : After packet and waveform synch is activated, the synch point of the waveform is the
middle packet.
Left of Waveform view area : After packet and waveform synch is activated, the synch point of the waveform is the
most left packet.
See below image for waveform and packet synch.