Zeroplus LAP-C(16032), User Manual

Page: 37 / 130

Smart+
User’s Manual V1.04.04
37 FM07I4A
3.3.2 Right Key Menu of Trigger and Filter Columns
Don’t Care
: Ignore all trigger/filter settings.
High : Set high level as the trigger condition or filter condition for the selected channel.
Low : Set low level as the trigger condition or filter condition for the selected channel.
Rising Edge : Set Rising Edge as the trigger condition for the selected channel.
Falling Edge : Set Falling Edge as the trigger condition for the selected channel.
Either Edge : Set Rising Edge and Falling Edge as the trigger condition for the selected channel.
Default : Restore all trigger conditions or filter conditions to default.
3.3.3 Right Key Menu of Waveform view area
Trace Format : Users can change the color and width of the waveform line, Bus(Protocol Analyzer) outline and analog
waveform line. This option is disabled in Listing Window.
Add Bar : When the cursor is in the waveform view area, press right key and select Add Bar to add a new bar with the
order of letter and color. When the cursor is in the left edge of waveform view area, it will become a cross, then left
clicking can also add a new bar.
Place :
A Bar: Place A Bar in the cursor position.
B Bar: Place B Bar in the cursor position.
Ds Bar: Place Ds Bar in the cursor position. It is available after “Select an Analytic Range” is activated.
Dp Bar: Place Dp Bar in the cursor position. It is available after “Select an Analytic Range” is activated.
More Bar: Place other bar, including the new added bar, to the cursor position.
Trace Type : Users can set the waveform to be square or sawtooth between high/low level switch. The default is square.
Packet Names : Display the packet name in abbreviation(initials) or fullname.
Find Pulse Width : Find the pulse width in one channel in or out of a Bus.