Zeroplus LAP-C(16032), User Manual

Page: 31 / 130

Smart+
User’s Manual V1.04.04
31 FM07I4A
8CH/1.6GHz : 8 Channels, 1.6GHz sampling frequency at most. The RAM size is double of that of 16CH/800MHz
Mode.
16CH/800MHz : 16 Channels, 800MHz sampling frequency at most. The RAM size is double of that of 32CH/800MHz
Mode.
32CH/400MHz : 32 Channels, 400MHz sampling frequency at most.
Connect Multiple smart+: Connect the hardwares of many Logic Analyzers of same model and make them work
together through the software to enhance the logic analysis capability, which represented by RAM size increasing and
channel quantity increasing.(This function is disabled for models of LAP-D Series.)
Connect to DSO : Stacked with the oscilloscope, the LA can transmit the oscilloscope waveform to the LA software to
display, so digital waveform and analog waveform can be displayed synchronically for users to compare and analyze.
Please refer to the section “DSO-stacked Settings” for more details.
Pulse Width Trigger Module(Option) : Set trigger occurs when the pulse width is in some specified range for single
channel. This function needs a Pulse Width Trigger Module hardware to work together. Please refer to the Pulse Width
Trigger Specification for details.
3.2.4 Analysis(D) Menu
Active Range : Select a waveform range to analyze by adjusting the position of Ds and Dp.
Bars:
Add: Add bar with user-defined quantity and color. The fixed order is A0-A9, B0-B9 and the like. 250 bars can be
added at most. Users can press the number between 0 and 9 to make the corresponding bar displayed in the middle.
Delete: Delete the new added bar.
Reposition: Place the selected bar in the middle of screen.
Noise Filter Setup : The software executes width filtering for the selected Channel/Bus, that will cause the waveform
whose width is less than the specified clock quantity be filtered.
Files Comparison : Contrast the waveform channels of two files and show the waveform differences and their positions
(SDK is not supported temporarily).
Math Operation : Execute the Boolean and Arithmetic operation for the current channel and output the new waveform.
Image Decode : Analyze the data format of Protocol Analyzer and display the decoded data in images(Protocol
Analyzer shall support this function).
Go To : Quickly go to the needed memory page or bar.
Specific Bus Data Display : Find the specific Bus data and mark it with color.
Draw Analog Waveform : The Bus data is not just displayed by pure data, but also by curve that indicating the data
change, which looks like a waveform. The Analog Waveform has two modes of displaying Single Analog Display and
Mixed Analog-Digital Display. At the same time it supports hexadecimal setting.