JesterML Operating Manual
Setup Mode
56 of 85
73-406-00 Issue 3.0
The JesterML also stores User Fixture Type files internally when they are used from
the <Assign Fixtures> menu. This allows them to be easily used again in the future.
To remove any unwanted files that are stored on the desk, select the <Delete User
Files> option under <Update Fixture Lib> and press ENTER. If there are any User
Fixture Type Files on the desk, these can be browsed using the up & down cursor
buttons. Select <OK> and press ENTER to delete the selected file from the desk.
You will be returned to the previous menu.
To leave the <Update Fixture Lib> menu and return to Setup, select <OK> and press
ENTER.
Setting Memory Recovery Mode
Recovery mode determines whether the JesterML stores the current & next
memories when restarted.
•
If Recovery Mode is On - the desk remembers which of the memories was
current, and which was next, and on restart these memories will automatically
be selected.
•
If Recovery Mode is Off - the desk will start in the first programmed memory,
and the next memory will be selected as the second programmed memory.
1. Select the <Memory Recovery> menu option using the cursor buttons, then press
ENTER.
2. The mode can be toggled by pressing ENTER, then using the up or down cursor
buttons to toggle between Memory Recovery On and Off. Once you’ve set the
recovery mode as you require, press ENTER, use the cursor buttons to select
<OK> and then press ENTER.
Remote Input
The remote input can be set to behave as any button on the front panel of the desk.
Use the cursor buttons to select <Remote Input> and press ENTER. Now press
ENTER and the button you want the remote input to trigger. The default is
Program/Go. Once you’ve set the input as you require, use the cursor buttons to
select <OK> and press ENTER.
To disable remote input, press SHIFT and ENTER with the button field selected. The
display will read <Disabled>.
Sound Input
Setup allows you to enable or disable the Sound2Lite input on the back of the desk.
Use the cursor buttons to select <Sound Input> and press ENTER. Now press
ENTER and use the up or down cursor buttons to toggle between <Enabled> and
<Disabled>. Once the option you wish is showing, press ENTER, then move to
<OK> and press ENTER again.
Summary of Contents for JesterML
Page 1: ...OPERATING MANUAL including...
