5-17
A
Headlight Alignment
The headlight should be checked for correct
alignment periodically. It must be aligned any time the
suspension sag is adjusted because this will affect
the headlight alignment. Before the headlight can be
aligned, the suspension sag and tire pressure must
be correctly adjusted. The headlight can be adjusted
vertically. If the vertical adjustment is off, it will cause
the beam to point too close to or too far ahead of the
motorcycle. With the headlight on the low beam
position, the motorcycle perpendicular to the ground,
and the operator sitting on the motorcycle, verify the
beam alignment. The motorcycle is shipped with the
headlight at a 0.5-2.5% dip.
The adjustment screw (A) is located on the back
upper right corner of the headlamp. To adjust the
headlight, turn screw until the correct beam alignment
is achieved.
Summary of Contents for DS 2012
