6-11
Charger-Disable Interlock
When the charger is attached and plugged in to AC
power, the BMS communicates with the charger. The
BMS can send a signal to the charger requesting that
charging terminates immediately. When the charger is
disabled, the indicator lights on the charger will show
that charging has stopped.
There are two conditions that will cause the BMS to
disable charging. One of these conditions is also
reported by a self-test result beep pattern, the other is
not.
Too Hot
If the BMS detects high internal power pack
temperatures, it will both disable the throttle and
prevent charging. This condition is also reported by a
flash code pattern after BMS self-test when the
motorcycle is turned ON. See Understanding BMS
Flash Code Patterns on page 6-4 for a description of
the Too Hot error and the solutions.
Summary of Contents for DS 2012
