5-13
A
3.
Loosen both front motor mount bolts (B) using a
6 mm Allen/Hex wrench. Loosen the 13 mm jam
nut (C) on the belt tensioner.
Note:
Belt tension will increase slightly when
motor mounts bolts are fully torqued.
C
B
D
5.
Tighten all motor mount Allen bolts. See Bolt
Torque Table on page 5-2.
6.
Tighten the 13 mm jam nut on the belt tensioner.
7.
Test ride the motorcycle.
8.
Recheck the belt for proper adjustment after the
test ride and readjust if necessary.
Drive Belt Adjustment Procedure
1.
Remove the key from the key switch.
2.
Loosen both rear motor mount bolts (A) using a
5 mm Allen/Hex wrench.
4. Turn the adjuster bolt (D) a 1/4 turn at a time
until the belt adjustment is within specification.
Summary of Contents for DS 2012
