Zero DS 2012, Owner'S Manual

Page: 49 / 120

4-12
A
1. Ensure that the key switch is in the OFF position.
2. Locate the auxiliary charging connector and
remove the protective cover.
3. Connect the power pack charger to the power
pack connector (A).
Quick Charging
The “scalable” quick charging feature utilizes up to
three auxiliary/standalone chargers (in addition to the
existing integrated charger) for up to a 75% reduction
in charge time. The amount for quick charging time
will vary with the number of chargers used; see
technical specifications on pages 1-6 through 1-10 for
charging times. The auxiliary/standalone charging
connector is located under a cover on the right upper
rear corner of the power pack.
Note: AVOID connecting the Zero charger and another
device to a single 120 V AC 15A/20A circuit, as it may
become overloaded. Zero chargers draw as much as
10 amps from the 120 V AC circuit when charging.
4. Charging a fully discharged power pack to 100%
takes about:
•
ZF6 6 hours
•
ZF9 9 hours
When the power pack is fully charged, disconnect the
power cord from the charger.