5-16
A
C
B
D
Drive Chain Adjustment Procedure
1. Remove the key from the key switch.
2. Loosen both rear motor mount bolts (A) using a
5 mm Allen/Hex wrench.
4. Loosen the 13 mm jam nut (C) on the chain
tensioner.
Note:
Chain tension will increase slightly when
motor mounts bolts are fully torqued.
5.
Turn the adjuster bolt (D) a 1/4 turn at a time until
the chain adjustment is within specification.
6.
Tighten all motor mount hex bolts. See Bolt
Torque Table on page 5-2.
7.
Tighten the 13 mm jam nut on the chain tensioner.
8.
Test ride the motorcycle.
9.
Recheck the chain for proper adjustment after the
test ride and readjust if necessary.
3. Loosen both front motor mount bolts (B) using a
6 mm Allen/Hex wrench.
Summary of Contents for DS 2012
