Z 1500/2000-135/155/175
30
Installation
www.zepro.com
4.6.1 Fixed underrun protection
1. Install the brackets on the tail lift frame using 3
x M12x100 bolts each, without tightening them.
See
Figure 51.
2. Install
the centre sheet-metal profile using 4 x
M12x110 bolts on the brackets. See
Figure 52
.
Tightening torque 55 Nm.
3. Tighten the bolts used to install the inner brack-
ets in step 1.
Tightening torque 55 Nm.
4. Install
the outer sheet-metal profiles using 2 x
M12x110 bolts each. See
Figure 53
.
Tightening torque 55 Nm.
Figure 51.
Installing brackets on the frame
Figure 52.
Installing the inner sheet-metal profile
Figure 53.
Installing the outer sheet-metal profile
Summary of Contents for Z 1500
Page 2: ......
