Z 1500/2000-135/155/175
Safety rules
15
www.zepro.com
3.5
Prepare the tail lift
1. Position the support frame under the vehicle’s chassis.
2. Remove the protective cover mounted with a rubber strap; see Figure 18
.
3.
Fold out the control card / relay card (B) and loosen the cabling at the connector on the hydraulic unit; see
Figure 19 and Figure 20
.
4.
Release the hydraulic unit by unscrewing the wing nut and corresponding screw (C); see
Figure 21
and
pull out the hydraulic unit until the tank cap is accessible; see
Figure 23
.
m
CAUTION!
Make sure no cables are pinched or in any other way damaged when the control card / relay card is folded out or removed.
Do not pull out the hydraulic unit more than necessary; make sure it is not pulled completely out of the frame, as this can
entail a risk of injury and damage to the equipment.
Figure 18.
Remove the protective cap
C
A
B
Figure 19.
Release mechanism
Figure 20. Connection socket
Figure 21.
Releasing the hydraulic unit
Summary of Contents for Z 1500
Page 2: ......
