IDAC
Technical Support:
9
2.2
INDOOR MODULE
This module is installed inside the room, embedded in the door.
It consists of a
pair of pushbuttons
or an
individual pushbutton
(depending on the
model) to control the state of the room.
In addition, it has a
proximity sensor
and an
ambient luminosity sensor
that will
allow the device to react to different situations of presence or illumination.
2.2.1
CONFIGURATION
In the "Configuration" tab of the Indoor Module, the general configurable parameters of
the module are displayed. Most of them are checkboxes to activate other
functionalities.
ETS PARAMETERIZATION
Figure 3.
Indoor Module Configuration
Room State Buttons
[
disabled/
enabled
]: enables or disables the “Room
State Butto
ns” tab in the tree on the left. See section 2.2.3 for details.
Touch Locking
[
disabled
/enabled
]: enables or disables the “Touch Locking”
tab in the tree on the left. See section 2.2.4 for details.
Customize Sounds
[
disabled/
enabled
]: enables or disables the “Sounds” tab
in the tree on the left. See section 2.2.5 for details.
