IDAC
Technical Support:
14
The range of sounds emitted when these actions are performing will be different
depending on the sound type selected (see section 2.1).
Enabling and disabling the button sounds can be done in parameters or through an
object, being also possible to set in parameters whether the button sounds should be
initially enabled or not.
Note:
Under no circumstances the alarm or the ring tone will be muted
.
ETS PARAMETERIZATION
After enabling the
Customize Sounds
in “Configuration” screen, in Indoor Module,
(see section 2.2.1), a new tab will be incorporated into the tree on the left.
Figure 6.
Indoor Module Sounds
Disable Button Sounds
[
disabled
/enabled
]: enables or disables acoustic
signals when actions derived from button presses are executed.
➢
Enable/Disable
Button
Sound
Through
a
1-bit
Object
[
disabled/
enabled
]: makes it possible to disable / resume the button
beeping function in runtime by writing to a specific object (“
[In] Sounds
–
Disabling Button Sound
”).
•
Button Sound (After Download)
[
enabled
/disabled
]: sets whether
the button beeping function should start up enabled or disabled after
an ETS download.
